nedelja, 17 dec 2017



Professional paper

UDC: UDC: 620.197.2:662.951.23

DOI: 10.7251/afts.2014.0611.051B

COBISS.RS-ID 4572696




Bošković Zvonimir1, Čebašek Vladimir1, Nuhanović Sanel2
1Rudarsko-geološki fakultet, Beograd, E-mail: Ova adresa el. pošte zaštićena je od spam napada, treba omogućiti JavaSkript da biste je videli
2Rudarsko-geološki gradjevinski fakultet, Tuzla


 ABSTRACT  Full text (pdf)

World production of pipes is mainly based on the standards of API. However, this does not obligate you to use exclusively for casing manufactured by API standards. The wells that will exploit the hydrocarbons and aggressive media, install the protective casing made ​​of alloy steel not yet covered by API standards. Running  casing operation holds a special place in all phases of the wells because of protective casing  account for a high percentage of the cost of drilling and improperly designed pipe string (or damaged by corrosion) increased costs due to repair of the object. If the fluid layer which produce, present aggressive gases (CO2, H2S, Cl), under certain thermodynamic conditions, it may cause significant corrosion of pipe materials. That created openings in the casing string may allow migration of gas. For this reason it is necessary to know the limits specified partial pressures of gases and estimate conditions in which corrosion is expressed.


Key words: partial pressure, corrosion, casing, hardness, hydrogen sulphide



Boškovic, Z. (2000).Model procesa cementacije zaštitnih cevi u gasnim bušotinama sa ekstremnim termobarskim uslovima, magistarski rad, Beograd
API Specification 5CT. Specification for Casing and Tubing, fifth edition, April 1. 1995
Bruce, D, Craig. (2000). Material selection for the oil and gas industry.
Bruce, D. Craig. Practical Oilfield Metallurgy and Corrosion, secong edition.
Technical Report on the Geological Exploration in a Coal Deposit "Delići and Peljave-Tobut" near Ugljevik (I Phase of exploration), Institute of Applied Geology and Hidro Engineering Bijeljina, 2012.
Dunlop, A., Hasse,l HL, Rhodes, PR. (1984). Fundametal considerations in sweet gas well corrosion. Hjuston. 1st edition, NACE.
Kermani, MB., Harrop, D. (1996). The impact of corrosion on the oil and gas industry, SPE Production Facilities.
Ling-feng, Li, Xiao-ming, Liu, Zhi-giang, Huang. (2012). Study and application for corrosion-resistant material selection of tubing and casing in sour gas reservoirs under coexistence of H2S and CO2, Advanced Materials Research, Vol 485.
Brondel, D., Edwards, R., Hayman, A., Hill, D., Mehta, S., Semerad, T. (1994). Corrosion in the oil industry. Oilfield Rev.













Copyright Tehnički institut Bijeljina, 2010.
Web dizajn : Stanko Zarić