utorak, 17 okt 2017

Original scientific paper
UDC: 665.61:543.544.3   
DOI: 10.7251/afts.2017.0916.027N
COBISS.RS-ID 6437656
Nesic Slavko1, Mitrović Vladimir2, Boškovic Zvonimir3, Hodžić Adnan4
3University of Banja Luka, Faculty of mining Prijedor, Republic of Srpska, Bosnia and Herzegovina
4University of Tuzla, Faculty of mining, geology and civil engineering, Bosnia and Herzegovina

ABSTRACT  Full text (pdf)

The oil reservoirs of the southeastern part of the Panonian basin are characterized by considerable presence of water,i.e.waterdrive. The hydrocarbon reservoirs are mostly in the middle and final production stages. The water production is especially significant in wells producing with an installed Electrical Submersible Pump (ESP). As production continues, it is a realistic expectation that the water cut increases as well.The rapid production of water has affected fluid production in a significant way.Produced water in the Elemir oilfield is gathered, treated and then injected into the porous layers through several wells.The current system for the preparation and treatment of produced water in the Elemir oilfield has functioned with evident technical issues.The main problems are increased volumes of produced fluids and the deposition of solids (scales) in water treatment system. In thisarticle, a new model for produced water treatment is presented, including technical, economic and environmental aspects. A new model fulfils volumetric requirements, improves oil/water separation and suspended solids removal which lead to better injection performance. 
Key words: Elemir oilfield, produced water treatment, scaling tendency, scale inhibition 



James, W., Amyx, D., Bass, M., Robert L. (1969). Whiting. Volume 1 of Petroleum Reservoir Engineering. Petroleum Reservoir Engineering: Physical properties McGraw-Hill.
Veil, J.A., Puder, M.G., Elcock, D., Redweik R. Jr. J. (2004). A White Paper Describing Produced Water from Production of Crude Oil, Natural Gas, and Coal Bed Methane. US DOE.
Khatib, Z. and Verbeek, P. (2002). Water to Value - Produced Water Management for Sustainable Field Development of Mature and Green Fields; SPE 73853, SPE international Conference on Health, Safety and Environment in Oil and Gas Exploration and Production held in Kuala Lumpur, Malaysia.
Ayers, R. C. Parker, M. (2001). Produced Water Waste Management. Canadian Association of Petroleum Producers (CAPP). Calgary, Alberta, Canada.
TUV-NEL, TUV 8th Produced Water Group Workshop, Aberdeen, UK, 2010.
Toril, I. Roe, U. (1999). Chemical characterization of produced water from four offshore oil production platforms in the North Sea. Chemosphere, Vol. 39, No. 15, pp. 2593-2606.
Fakhru’l, R.A., Pendashteha, A., Luqman C.A., Dayang, R.A.B., Sayed, S.M., Zurina, Z. A., (2009). Review of technologies for oil and gas produced water treatment, Journal of Hazardous Materials 170. 
Hansen, B.R. Davies, S.H. (1994). Review of potential technologies for the removal of dissolved components from produced water, Chem. Eng. Res. Des. 72. 
Neff, J. M. (1987). Biological effects of drilling fluids, drill cuttings and produced waters. In D.F. Boesch and N.N. Rabalais (eds) Long-Term Effects of Offshore Oil and Gas Development. Elsevier Applied Science Publishers, London. pp. 469-538.
Georgie, W.J. (2002). Effective and Holistic Approach to produced Water Management for Offshore Operation. OTC 14286, Offshore Technology Conference held in Houston, Texas U.S.A., 6–9.
A. Hussain, A. at all. (2014). Advanced Technologies for Produced Water Treatment, OTC-24749-MS, Offshore Technology Conference.
Copyright Tehnički institut Bijeljina, 2010.
Web dizajn : Stanko Zarić

uređuje: www.asteh.com