In nature, the bucking behavior of the web of I section reduces the member's strength considerably. Hence, in common practice, people use the intermediate and end stiffeners to improve the strength of the beam. The stiffeners are connected to the web using the welded connections. In this paper, the experimental study on steel beams with and without stiffeners is reported. The weld length of the stiffeners has been varied and the study has been carried out. Three specimens were tested. One without stiffeners, one with full weld, and one with half weld. The strength will be enhanced due to the presence of stiffeners. The increase is about 53%. It is interesting to note that the strength of the half weld and full-weld specimens is not very different. All the other parameters such as ductility, stiffness, and energy dissipation are reported in the paper.
Okada T, Kawamura Y. Strength evaluation of intersection between stiffeners and primary supporting members considering the effect of shear force on the primary member web. Marine Structures. 2018;59:25–46.
2.
Ramona P, Analysis DG. Cost Estimation and Optimization of Reinforced Concrete Slab Strengthening by STEEL AND CFRP STRIPS. Archives for Technical Sciences/Arhiv za Tehnicke Nauke. 2023;1(29):35–48.
3.
Yang Z, Cao W, Qiao Q, Zhang J. Experimental and numerical study on the prefabricated double L-shaped beam-column joint with triangular stiffener. Journal of Building Engineering. 2023;69:106315.
4.
Levchenko A, Polikutin A, Barabash D. Crack Resistance of Reinforced Concreted and Reinforced Rubber Concrete Beams. Archives for Technical Sciences. 2020;1(22):21–6.
5.
Zhang M, Zhang Z, Lei L, Zhou W, Du M, Zhang B. Effect of repair weld length on microstructure evolution and mechanical properties of 30CrMnSiNi2A ultra-high strength steel. Journal of Materials Research and Technology. 2023;23:4828–42.
6.
Kadhim AA, Mohammed SJ, Al-Gayem Q. DVB-T2 Energy and Spectral Efficiency Trade-off Optimization based on Genetic Algorithm. Journal of Internet Services and Information Security. 2024;14(3):213–25.
7.
Li Y, Li Y, Zhang C, Lei M, Luo J, Guo X, et al. Effect of structural restraint caused by the stiffener on welding residual stress and deformation in thick-plate T-joints. Journal of Materials Research and Technology. 2022;21:3397–411.
8.
Subramanian R, Jagadeesan K. Experimental analysis and study on shear performances of castellated beam chassis under three cases of stiffener. Journal of Engineering Research. 2023;11(2B).
9.
Surendar DrA, Veerappan S, Sindhu S, Arvinth N. A Bibliometric Study of Publication- Citations in a Range of Journal Articles. Indian Journal of Information Sources and Services. 2024;14(2):97–103.
10.
Yu JG, Feng XT, Li B, Chen YT. Effects of non-welded multi-rib stiffeners on the performance of steel plate shear walls. Journal of Constructional Steel Research. 2018;144:1–12.
11.
Aydın MG, Depci T, Yalman E. Effect of Amorphous Silica Produced from Pumice and Quartzite on the Flow Characteristics of Drilling Mud. Natural and Engineering Sciences. 2022;1;7(3):319-324.
12.
Anupriya B, Jagadeesan K, Saranya B. Effect of Stiffeners on Castellated Beams. Asian Journal of Research in Social Sciences and Humanities. 6(12):30.
13.
Anupriya B, Jagadeesan K. Experimental Investigation of Shear Strength of Castellated Beam with and without Stiffener. Structural Engineering Journal. 2015;42(4).
14.
Standard BI. General construction in steel-code of practice. 3rd Revision, Bureau of Indian Standard.
Citation
Copyright
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.
,
