ON THE ABRASIVE WEAR HIGH STRENGTH COATING LAYERS ON MACHINE PARTS TESTING
Plasma coating technology was applied to machine parts. During application, the jet formed hits the surface of the material and particles are deposited on the surface. In this way, layers of high thickness can be applied and thus revitalize worn machine parts. The paper examines the abrasion resistance of Al2O3 and Al2O3 phosphate layers applied to...
By Pavel Kovač, Borislav Savković, Dušan Jesić, Ildico Mankova
LANDSLIDE REMEDIATION ON LOCATION ČOLE, THE SETTLEMENT ŽELJEZNO POLJE, ŽEPČE MUNICIPALITY
The aim of this paper is to present a landslide's remediation conducted on the basis of research and testing of samples, and list those measures that will help to remediate the landslide or partially mitigate its further effects. These measures include: closing cracks, collecting and draining surface water from landslides, terrain planning, making ...
By Zlatan Talić, Dženita Cerić, Ajla Rekić, Anela Hrnjica
CORRELATION AND REGRESSION RELATIONSHIPS OF PARAMETERS OF RAINWATER DRAINAGE FROM ROADS
In order to find the optimal solution for the drainage of rainwater from roads in urban areas, as well as for the evaluation and ranking of conceptual solutions, appropriate mathematical models and software packages were used in this research. For relevant rain episodes, i.e. rainfall of appropriate duration and intensity, runoff coefficients and f...
By Anadel Galamić, Zahid Bašić, Nedim Suljić
STRATEGY OPTIMIZATION FOR RESPONDING TO PRIMARY, SECONDARY AND RESIDUAL RISKS CONSIDERING COST AND TIME DIMENSIONS IN PETROCHEMICAL PROJECTS
Risk management throughout the project life cycle, from the initial phase beginning to the final phase, ended continuously and dynamically, is one of the basic requirements for the success of any project oriented organization. To effectively identify and manage risks at all stages of the project, careful selection must be made at all levels of the ...
By Asl Maryam Tabatabay, Asl Saeedeh Tabababay
THE SIGNIF ICANCE OF HARVEST RESIDUES IN THE SUSTAINABLE MANAGEMENT OF ARABLE LAND. II. HARVEST RESIDUES MANAGEMENT
Harvest residues (HR) are one of the important aspects of sustainable management in agriculture, representing a significant portion of organic matter (OM) that can be retained or removed from agroecosystems. There are several ways to manage plant residues: (i) burning, (ii) incorporation in soil, (iii) leaving plant residues after harvest on the s...
By Novo Pržulj, Vesna Tunguz, Zoran Jovović, Ana Velimirović
COMPARATIVE ANALYSIS OF OLD-GROWTH STANDS JANJ AND LOM USING VEGETATION INDICES
Old-growth forests represent a very valuable field for research of natural processes. The application of remote sensing was carried out on two old-growth forests in the northwestern part of the Republic of Srpska. The sample plots from OG Janj show relatively higher mean values (NDVI, SAVI and EVI) compared to OG Lom, with the exception of the VARI...
By Zoran Govedar, Nemanja Anikić, Srđan Bilić
GEOLOGICAL AND ECONOMIC CHARACTERISTICS OF DOLOMITE DEPOSIT NIKOLIN POTOK NEAR BUGOJNO
This paper presents the results of detailed geological investigations of the Middle Triassic dolomite deposit of Nikolin Potok, which is located west of Bugojno. Based on the established borders of surface distribution and research results, geological reserves of about 4.6 million m3 have been determined in the wider area of the deposit. The dolomi...
By Dževad Forčaković, Rejhana Dervišević
INFLUENCE OF CREEP CONCRETE ON SPACE STABILITY THIN-WALLED DOME COVERINGS
The task was set, due to the capabilities of modern software systems, to assess the effect of the increase in inelastic deformations under prolonged load action on the loss of stability of thin-walled dome coverings. The study of the dependences of the forms of the loss of stability of dome covering from creep concrete that will help further with o...
By Sergey Gridnev, Ekaterina Prokshits, Olga Sotnikova, Iana Zolotukhina
INFLUENCE OF ROUGHTY OF A RECTANGULAR OPEN CHANNEL ON FLOW SPEEDS AND WATER FLOW
This paper presents an analysis of water flow and flow velocity in an open channel of rectangular cross section as a function of channel roughness, ie Manning roughness coefficient. Three different cases of finishing the open channel of rectangular cross-section were analyzed, namely the concrete channel, the channel with smoothed cement mortar and...
By Nedim Suljić
CHEMICAL LEACHING OF CONTAMINATED SOIL – CASE STUDY
This study presents results of chemical leaching of contaminated soil from several metallurgically loaded locality of Richnava in Slovakia, applying two chelants – Na2EDTA and Na3EDDS of different molar concentration, done at different leaching conditions. The lower molar concentration (2 mM) of chelants showed comparable effect on Mn, Ni, As...
By Zuzana Danková, Iveta Štyriaková, Ľubica Kovaničová, Katarína Čechovská, Marián Košuth, Jaroslav Šuba, Jarmila Nováková, Patrik Konečný, Ľubomír Tuček, Katarína Žecová, Eva Lenhardtová, Zoltán Németh