EXPERIMENTAL STUDY ON OPTIMIZING THE FUSED DEPOSITION MODELING PARAMETERS FOR POLYETHYLENE TEREPHTHALATE GLYCOL MATERIAL USING TAGUCHI METHOD
In many different manufacturing techniques, additive manufacturing technologies have proven to be quite useful for developing a prototype model in wide range of applications. In that technique, Fused Deposition Modeling (FDM) is one of the concern favorite methods used in industries, because it can create complex structures at a low cost. FDM...
By M Prasath, P.S Sampath, C Saravanan, R Gokul, J Hari Prakash
A DATA DRIVEN APPROACH THROUGH IOMT BASED PATIENT HEALTHCARE MONITORING SYSTEM
The current circumstances underscore the pressing need to accelerate the adoption of Internet of Things platforms in realm of the medical field to improve the health of mankind. Given the present challenges, I propose the development of an Advancing healthcare monitoring system built on the foundation of Internet of Medical Things (IOMT). Advancing...
By E Veera Boopathy, M.A.Y Peer Mohamed Appa, S Pragadeswaran, D Karthick Raja, M Gowtham, R Kishore, P Vimalraj, K Vissnuvardhan
IOT USE IN A FARMING AREA TO MANAGE WATER CONVEYANCE
Agriculture is the most advanced civilian profession. However, farmers in India continue to use traditional agricultural supervision approaches, resulting in water failure problems. Currently, Automatic irrigation systems using humidity detectors, rain sensors, and temperature sensors are used for effectively managing water in an agricultural field...
By G.K Monica Nandini
HISTORICAL DEVELOPMENT OF CONSTRUCTION TECHNIQUES: FROM ANCIENT ARCHITECTURE TO MODERN ENGINEERING
The history of architecture has been molded with the development in modes of construction, reflecting the social, economic, and technological advancement of different civilizations. This paper discusses the chronological development of the various methods of construction from ancient architecture to modern engineering and cites some key milestones ...
By Nodir Karimov, Maman Sarybaev, Aynazar Kaipnazarov, Nematjan Djumageldiev, Rustem Reymbaev, Fariza Kholdarova
LIQUEFACTION-INDUCED DAMAGE IN THE CITIES OF ISKENDERUN AND GOLBASI AFTER THE 2023 TURKEY EARTHQUAKE
On February 6th 2023 two major earthquakes struck southeast Turkey, M7.7 Kahramanmaras and M7.6 Elbistan, respectively. Unfortunately, due to the impact of these catastrophic events more than 50 000 casualties and 35 000 collapsed buildings have been reported since then. The aim of the study is to demonstrate preliminary site response analysis and ...
By Nikolay Milev, Kiyota Takashi, Juan Briones, Othon Briones, Ozer Cinicioglu, Seda Torisu
MODELS OF CONTEPMPORARY GEODYNAMIC PROCESSES ON THE RIM OF THE SARAJEVO DEPRESSION
The rim of the Sarajevo depression was exposed to a strong construction expansion, which was not followed by spatial planning documentation. This work presents models of modern geodynamic processes, which are mainly caused by technogenic effects. The characteristics of these processes mainly depend on the morphological properties of the terrain, ge...
By Aco Goljanin, Amel Demirović, Maida Žiko
SEPARATED GEOTECHNICAL ENVIRONMENTS DURING THE RESEARCH OF THE TERRAIN AT THE LOCATION PLANNED FOR THE CONSTRUCTION OF THE SILOS IN KOZLUK NEAR ZVORNIK
The construction of high-rise objects in solid rocks characterized by frequent changes in its vertical profile requires a more detailed study of lithological layers, tectonic characteristics and analysis of physical and mechanical parameters. Layers of different strength and characteristics in all elements make it possible to separate it by geologi...
By Neđo Đurić, Dijana Djuric
ANALYSIS OF OCCUPATIONAL INJURIES IN AN IRON ORE MINE IN BOSNIA AND HERZEGOVINA IN THE PERIOD FROM 2002 TO 2021
By designing protection measures, the occupational safety system should provide the best possible working conditions for all employees in every economic activity, including in mining production. The analysis of occupational injuries in a certain period of time should enable the collection of data on certain etiological specificities of injuries and...
By Biljana Vranješ, Mile Vajkić, Ljubica Figun, Dragan Adamović, Evica Jovanović
EFFECTS OF LANDFILL LEACHES ON GROUND AND SURFACE WATERS: A CASE STUDY OF A WILD LANDFILL IN EASTERN BOSNIA AND HERZEGOVINA
Landfill leachate, due to its high total pollution, and above all due to their high organic pollution, represents a significant environmental problem. This study investigated the impacts of the Tilić ada landfill on ground and surface waters. The location of the landfill Tilić ada is extremely sensitive due to the fact that it is located right next...
By Svetlana Sredić, Nebojsa Knezevic, Igor Milunović
EFFECT OF STATE OF FABRIC ON WICKING CHARACTERISTICS OF KNITTED FABRICS SUITABLE FOR SPORTS APPLICATIONS
This study examines the wicking properties of different fabrics produced from 100% Polyester, 100% Soybean, and bilayer (Polyester and Soybean), under various conditions (relaxed, static deformation, and dynamic deformation). The study evaluates the wicking area, liquid spread, and maximum wetted radius to understand moisture transport and absorpti...
By S Priyalatha