RISK ASSESSMENTIN THE WORKPLACE IN OIL INDUSTRY
The risk assessment is based on the systematic recording and evaluation of all factors in the work process, the possible dangers and hazards in the workplace and in the working environment that may cause occupational injury, damage to health or illness of the employee. Risk assessment focus is on work organization, work processes, tools, raw mater...
By Nebojša Knežević
THE ELECTROFILTER ASH OF GACKO THERMAL POWER PLANT AS TECHNOGENIC RAW MATERIAL AND THE IMPACT OF ASH WASTE PILEON THE ENVIRONMENT
During the working of thermal power plants, due to technological process of coal combustion, waste matter, which takes up large areas of land, degrades and pollutes the environment, is created. In the last years, a significant progress has been made in the world in researching new technologies that implement technogenic materials which have wide ra...
By Ljiljana Crnogorac, Boško Vuković
ANALYSIS OF WATER QUALITY ZERO CONDITION IN THE AREA OF SILICON MATERIAL FACTORY
Construction of the silica material factory named "R-S Silicon", with an annual production capacity of 15,210 ton of Si-metal, was planned in the village of Bjelajce, municipality of Mrkonjić Grad. The factory for production of Si-metal shall have direct and indirect environmental impacts, especially on waters, by washing off working areas, leachat...
By Dušica Pešević, Nebojša Knežević
FILLING THE EXCAVATED EMPTY AREA IN UNDERGROUND EXPLOITATION OF THE MINE “KREKA” AIMED AT REDUCING DEFORMATIONS OF THE SURFACE CAUSED BY EXCAVATION
Taking into consideration the current situation in the field of energy, the specific conditions of our mining and contemporary achievements in the field of underground exploitation, it can be stated that new circumstances in terms of techno-economic and security parameters of exploitation in the whole system of the exploitation of the coal deposits...
By Edin Fazlić, Semir Fejzić
APPLICATION OF CONSTRUCTION SCHEDULE FOR MONITORING AND CONTROL OF CIVIL ENGENEERING PROJECTS
Construction schedule becomes part of positive practice of our construction. The construction of Building and Residential Complex Stepa Stepanovic has been used for conducting research among responsible contractors on certain aspects of schedule execution, problems during its executions and use in construction process. The results of the research s...
By Danijela Stanojlović
PORE PRESSURE AND FRACTURING PRESSURE INFLUENCE AT BOREHOLES CONSTRUCTION ON THE ROCK SALT DEPOSIT ''TETIMA'' TUZLA
In the rock salt deposit "Tetima" by analysis of situation and pore (layers) pressures and fracturing pressures development it has been proved that the values of pore and fracturing pressures are quite low (in the part of deposit which is currently exploited) and on the border of use salt water such as fluid for canal rinse in some drilling interva...
By Sanel Nuhanović, Adnan Hodžić, Almir Šabović
GEOLOGICAL EVALUATION OF THE STATE OF THE ROUTE M18, SECTION FOCA – HUM, REPUBLIC OF SRPSKA
Improvement of the quality of the route is necessary because of its importance in connecting countries of the Western Balkans to central and western Europe. This is the worst section of the road from Albania via Montenegro and Bosnia and Herzegovina to the corridor Vc, which passes through the central part of Bosnia and Herzegovina. The route of th...
By Neđo Đurić, Andja Djujic
PERSPECTIVES FOR DEVELOPMENT OF TECHNICAL BUILDING STONE- LIMESTONE IN THE REPUBLIC SRPSKA
Curent situation of raw material base and study of limestone like construction stone deposits in the Republic of Serbian were relatively poorly considered during the last decades, and the main problems are the following: low production capacity,fragmentation of production, needs for raw materials homogenization and delivering of standard quality, u...
By Slobodan Majstorović, Vladimir Malbašić
DEFINING CONDITION OF PRESSURE AROUND THE UNDERGROUND OPENING TRAPEZOIDAL IN SHAPE, SUBSTRUCTURED BY ANCHORS IN MULTILAYERED DEPOSITS INVESTIGATED BY THE METHOD OF FINAL ELEMENTS
The computer program ADINA is used for the pressure analysis on the model of the underground opening, trapezoidal in shape in layers of lignite. An analysis was made before, during and after the setting of three and five anchors. The theory about pressure distribution for secondary and tertiary pressure condition in the roof and board sides of the ...
By Semir Fejzić, Jovo Miljanović, Edin Fazlić
INFLUENCE OF VOLUME WEIGHT ON GABBRO UNIAXIAL COMPRESSION STRENGTH
Jablanica gabbro represents the highest quality architectural building stone in Bosnia and Herzegovina. Knowledge of the physical and mechanical characteristics of gabbro is an important prerequisite for the proper usage of this rock material. This paper presents a brief review of the geological characteristics Jablanica gabbro deposit, with distin...
By Kenan Mandžić, Adnan Ibrahimović