The paper defines choice of the optimal excavation method for ore deposits, which are characterized by general irregularity due to their origin, occurrence and different content of the usable minerals. In such complex conditions, the choice of the excavation method is defined according to: the natural characteristics of the deposit and according to...

By Slobodan Majstorović, Dražana Tošić, Duško Torbica

Using limited materials for numerical modeling of structural samples and comparing the behavior of samples with each other in order to reduce the number of straw test samples in order to reduce laboratory costs is one of the best methods today. ANSYS is one of the finite element software that is used for modeling reinforced concrete elements by Sol...

By Barghlame Hadi

As a result of the planned change of use, the imposed load on the existing reinforced concrete mezzanine slab will be significantly increased, wherefore a diagnostics and assessment of the current state of the structure has been carried out. The control calculation showed that the slab does not have sufficient bearing capacity for the increased loa...

By Ramona Petrov, Danica Goleš

The main subject of this manuscript is mountain streams used by construction of small hydro power plants. The motivation for this research stemmed from a number of conflicting opinions about the justification of the construction of small hydropower plants and their facilities. This research encompasses different methods for the analysis of the just...

By Ivan Stevovic, Sabahudin Hadrović, Jovana Jovanović

The aim of this paper is to present a landslide remediation based on research and testing of samples, and to list those measures that will help to remediate the landslide or partially mitigate its further effects. These measures include: closing cracks, collecting and draining surface water from landslides, terrain planning, making supports from st...

By Zlatan Talić, Dženita Cerić

Changes in the built environment are inevitable due to diversity in human needs over time and it is suggested by scientists to consider flexibility and adaptability under concept of Open Building Systems (OBS) to mitigate impacts on environment and to satisfy the end-user. However, conventional methods are still common due to the lack of knowledge ...

By Mostafa Hosseini, Syahrizal Ibrahim Izni, Nobahar Sadeghifam Aidin, Rahnama Hamed

The aim of this paper is to present a landslide's remediation conducted on the basis of research and testing of samples, and list those measures that will help to remediate the landslide or partially mitigate its further effects. These measures include: closing cracks, collecting and draining surface water from landslides, terrain planning, making ...

By Zlatan Talić, Dženita Cerić, Ajla Rekić, Anela Hrnjica

Risk management throughout the project life cycle, from the initial phase beginning to the final phase, ended continuously and dynamically, is one of the basic requirements for the success of any project oriented organization. To effectively identify and manage risks at all stages of the project, careful selection must be made at all levels of the ...

By Asl Maryam Tabatabay, Asl Saeedeh Tabababay

The task was set, due to the capabilities of modern software systems, to assess the effect of the increase in inelastic deformations under prolonged load action on the loss of stability of thin-walled dome coverings. The study of the dependences of the forms of the loss of stability of dome covering from creep concrete that will help further with o...

By Sergey Gridnev, Ekaterina Prokshits, Olga Sotnikova, Iana Zolotukhina

The aim of this paper is to identify the most suitable locations for the construction of Solar Photovoltaic Plants (PVP) on the territory of the City of Belgrade (Republic of Serbia). The city is rich in natural resources and abundant in energy potential. The climatic and spatial characteristics favor the use of solar energy: the average annual sol...

By Dejan Filipović, Ana Lukić, Milica Lukić