APPLICATION OF CONSTRUCTION SCHEDULE FOR MONITORING AND CONTROL OF CIVIL ENGENEERING PROJECTS
Construction schedule becomes part of positive practice of our construction. The construction of Building and Residential Complex Stepa Stepanovic has been used for conducting research among responsible contractors on certain aspects of schedule execution, problems during its executions and use in construction process. The results of the research s...
By Danijela Stanojlović
SORPTION OF COPPER AND ZINC BY GOETHITE AND HEMATITE
In the present work, the abilities of natural and synthetic samples of goethite and hematite to remove copper Cu(II) ) and zinc Zn(II) ions from aqueous solutions were compared. Batch adsorption experiments were performed in order to evaluate the removal efficiency of iron oxide samples. The effect of initial metal ion concentration, initial pH and...
By Alexandra Bekényiová, Iveta Štyriaková, Zuzana Danková
INFLUENCE OF ENVIRONMENTAL CONDITIONS ON CARBON AND NITROGEN CONTENT IN SERBIAN RENDZINA SOILS
Organic matter in Serbian Rendzina soils dependence on altitude and geographic regions was investigated. There was no regular dynamics of carbon and nitrogen content nor in C/N ratio, probably because of slight climatic variation among altitudes and regions, thus negligible differences in vegetation, organic litter and decomposition dynamics. Predi...
By Svjetlana Radmanović (Cupać), Aleksandar Đorđević, Nataša Nikolić
VARIATION IMPACT LEACHATE FROM LANDFILLS BRIJESNICA ON QUALITY OF SURFACE AND GROUND WATER
Regional Landfill Brijesnica is located in the northeastern part of Bosnia and Herzegovina, and the western part of the municipality of Bijeljina, and began work in 2010, with an approximate area of 4.5 ha. The sanitary cells are built with protective insulating materials - special geomembranes and other materials that guarantee the protection of g...
By Nebojša Knežević, Ljiljana Vukić, Danijela Knežević
IMPORTANCE OF OLISTOSTROME MEMBER FOR METALLOGENY OF LJUBIJA IRON ORE DEPOSITS
Ljubija mining area is built of more formations that belong to the Carboniferous, Permian, Triassic and Cenozoic. From all of these, only two are metalliferous to iron: Javorik formation with olistostrome member and Neogene-Quaternary of Prijedor basin. The first includes primary siderite and ankerite partially limonitised ore and in the second onl...
By Aleksandar Grubić, Ranko Cvijić, Aleksej Milošević, Miodrag Čelebić
GEOTECHNICAL CONDITIONS FOR CREATION OF THE VERTICAL SHAFT FOR RECONSTRUCTION OF OIL PIPELINE FROM TERMINAL BROD TO CROATIAN BORDER ON SAVA RIVER
Reconstruction of share in an existing corridor of Terminal Brod to the Croatian border on the Sava River is part of the corridor, which continues to go across the river to Slavonski Brod. The existing corridor will be replaced on a part of Sava River, where is planned a production of a tunnel with two vertical shafts on the banks of the river. Res...
By Neđo Đurić, Petar Mitrović
THE VULNERABILITY DETERMINATION OF GROUNDWATER BODIES IN SOUTHEASTERN BOSNIA ACCORDING TO DRASTIC, GLA AND EPIK METHODS
The vulnerability results of groundwaterbodies of southeastern Bosnia are shown in this paper. On the examined area 27 groundwater bodies were extracted, where 12 groundwaterbodies are in rocks with intergranular porosity and 15 groundwaterbodies are in rocks with karst-fissure porosity. All of the groundwater bodies were analysed through DRASTIC, ...
By Dado Srkalović, Željka Stjepić Srkalović
GEOLOGICAL CONDITIONS FOR BUILDING OF THE NEUM-STOLAC ROAD ON THE SECTION BROČANACDRENOVAC
Within the project task for the road M-17,3 Buna-Neum, section Neum-Stolac, several variants have been considered and the section has been divided into several sub-sections. The sub-section Stari NeumKiševo in the length of cca 3 km has already been built, as well as the sub-section of Kiševo-Bročanac, with length cca 8,5 km. Within the sub-section...
By Mevlida Operta, Suada Pamuk
DEFINITION OF CRACKS FOR THE ULTIMATE DEGENERATION PROCESS OF REVOLVING ELLIPSOIDS
The state of stress around cavities of the revolving ellipsoidal shape (prolate or oblate) in the extreme cases of their degeneration is a very complex problem. Namely, the shape of cavities is defined by an appropriate curvilinear coordinate system, which contains hyperbolic and trigonometric functions. In this paper, the treatment of revolving el...
By Dragan Lukić, Elefterija Zlatanović
USE OF BROMS’S METHOD AND FINITE DIFFERENCE METHOD IN THE DIMENSIONING OF PILES FOR FOUNDATION PIT INSURANCE
Implementation of major construction projects thanks are due to the technological development of materials and equipment to perform. Development of equipment for piles, allowed this type of structure a large application, as in the system of basic structural elements, as well as providing (temporary or permanent) construction site. Influences on the...
By Svjetlana Vlaški